Features & Specifications:
- 1.5 foot/.0,5 meter ultra bright, indoor LED Color Bar with 125, 10mm LEDs (24 Red, 54
Green, & 47 Blue LEDs)
- Includes wireless infrared remote control up to 30 ft./10M (Model: ADJ LED RC)
- 7 DMX Channel modes: 1, 2, 3, 4, 5, 6 & 7 channel modes
- 7 Operational modes: Manual Color Mode; Color Change Mode; Color Fade Mode;
Auto (Program Run) Mode; Sound Active Mode; RGB Manual Control Mode and
DMX-512 Mode
- Great as an architectural wall wash or for performance stages where traditional stage
lighting emit a lot of heat onto performers
- Smooth RGB color mixing (fast or slow color change operation)
- 32 built-in Color Macros
- Color strobe effect
- DMX-512 Protocol
- Electronic Dimming: 0 - 100%
- Beam angle: 40-degree
- Linkable via 3-pin XLR cable
- 4-button LED display on rear panel
- IEC AC outlet on rear to daisy chain power
- Includes mounting brackets
- Long life LED (Rated at 100,000 hrs.)
- Low power consumption
- Very low heat output
- Run all night – No duty cycle
- Multi-voltage: 90-240V, 50/60Hz
- Power Draw: 18W max
- Dimensions (LxWxH): 560x63x100mm
- Weight: 3 lbs. / 1.5 kg.
ADJ LED RC Infrared Remote Control Features:
- Black Out: Turns fixture On/Off
- Auto Run: Automatically run through built-in programs
- Program Selection: Access units built-in programs
- Flash: Strobe effect
- Speed: Control speed of Auto Run
- Sound Active: Activates sound active mode
- Slave: Designates the fixture as a “slave” fixture in the Master/Slave configuration
- Set Address: Set DMX Address on a fixture
- RGB Buttons: Adjust RGB colors with the “+” and “-“ buttons
- + and – Buttons: Adjust flash rate, speed of the Auto Run and Program Selection